
Valrico Cabinet Refacing
Cabinet Refinishing & Painting in Valrico, FL
Cabinet refinishing and painting in Valrico, FL refreshes existing doors with sprayed finish, no new doors needed, free estimates included.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Valrico and nearby communities.
Refinishing keeps your existing doors and boxes and changes the finish, paint or stain, instead of replacing anything. That's the key difference from refacing: no new doors, no veneer, just a new coat done right. Valrico Cabinet Refacing sprays cabinets rather than brushes them, which matters more than most homeowners realize once grease and daily wear start hitting the surface.
This fits oak cabinets common in older Valrico kitchens that just read dated against updated counters or floors. The wood underneath is fine. The orange-peel oak finish from the 90s is the problem, and that's a paint job, not a reface.
What's included
What's included with Cabinet Refinishing & Painting
Typically included
- Degreasing and sanding prep on all cabinet surfaces
- Primer coat for adhesion
- Sprayed enamel paint or wood stain in your chosen color
- Clear topcoat for protection
Optional
- Hardware swap while doors are off for painting
- Interior cabinet shelf refinishing
- Glaze or distressed finish techniques
Customer prep
- Empty cabinet contents before work starts
- Plan for limited kitchen access during the spray and cure stages
Want a clearer scope?
Get a Free EstimateHow it works
How our Cabinet Refinishing & Painting process works
Step 1Surface Cleaning
Years of kitchen grease get stripped off before any sanding starts.
Step 2Sanding Preparation
Surfaces are sanded enough for paint to bite, not so much the wood grain gets damaged.
Step 3Primer Application
A bonding primer goes on so the finish coat doesn't peel within a year.
Step 4Paint or Stain Coating
Color goes on in a controlled spray environment for even coverage.
Step 5Drying and Curing
Finished doors cure fully before they go back on hinges.
Step 6Hardware Reinstallation
Hardware goes back on once the finish has hardened enough to handle it.
Materials
Materials and methods for Cabinet Refinishing & Painting

Cabinet-Grade Primer
A bonding primer built for cabinet surfaces holds the finish coat through daily kitchen wear, unlike wall primer repurposed for cabinets.

Enamel Paint
Hard enamel resists the grease and humidity that break down softer paint finishes in Florida kitchens.

Wood Stain
For homeowners keeping the wood grain visible, stain refreshes tone without hiding the material.

Polyurethane Topcoat
A clear sealant locks in the finish and resists water spotting near sinks.

Sanding Sponges
Fine sponges smooth between coats without cutting through the primer layer underneath.

Masking Materials
Tape and film keep overspray off counters, backsplash, and floors during the job.
Questions on materials?
Get a Free EstimateBefore & after
Before and after Cabinet Refinishing & Painting results

Before 
After
When to call
When to call for Cabinet Refinishing & Painting
Call (786) 751-4194 or request a free estimate to find out if refinishing fits your kitchen.
- Your cabinet wood and boxes are structurally fine but the color or finish feels dated
- A past DIY paint job is already peeling or chipping at the edges
- You want a lower-cost update than a full reface and your doors don't need replacing
Seeing warning signs?
Get a Free EstimateFAQs
Cabinet Refinishing & Painting FAQs
What's the difference between refacing and refinishing?
Refinishing changes the finish on your existing doors and boxes. Refacing replaces the doors and adds new veneer to the boxes. Refinishing costs less but only works if your doors are structurally sound.
Is it cheaper to paint cabinets myself?
DIY paint can look fine for a few months, but brush-applied coats chip and peel faster than a sprayed factory-style finish because the coat is thinner and less even at the edges.
How long before I can use my cabinets after painting?
Doors typically cure for several days before hardware goes back on and the kitchen is back in full use.
Can thermofoil cabinets be refinished instead of refaced?
Not usually. Thermofoil is a foil-wrapped surface, and paint doesn't bond to it the way it bonds to wood. Peeling thermofoil needs a reface, not a paint job.
Will the new finish hold up to daily cooking?
A sprayed enamel with a cured topcoat holds up to grease and wipe-downs far better than a brushed DIY coat.
More services
Other Cabinet Refacing services

Cabinet Refacing
Cabinet refacing in Valrico, FL with matched veneer boxes, new doors, and free written estimates.

Kitchen Cabinet Refacing
Kitchen cabinet refacing in Valrico, FL matched to your counters and floors, with free written estimates.

Bathroom Vanity Refacing
Bathroom vanity refacing in Valrico, FL with moisture-resistant finishes and free written estimates.
Ask about Cabinet Refinishing & Painting
Tell us about the project and how to reach you.